コンテンツにスキップ
CONTACT SALES: +61 2 5500 7523
CONTACT SALES: +61 2 5500 7523

言語

Radium Fuel Pump Hanger Suit Walbro 460/525/535 - Subaru BRZ ZD8 & Toyota GR86 ZN8 22+

Radium Engineering による
SKU 20-1074
元の価格 ¥114,875 - 元の価格 ¥114,875
元の価格
¥114,875
¥114,875 - ¥114,875
現在の価格 ¥114,875

Important Notes: Aftermarket fuel regulator required, sold separately. Aftermarket fuel filter required, sold separately.

 

The new Radium Engineering fuel pump hanger has been redesigned for improved fuel collection and for ease of installation. It completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket fuel pumps to be used. The OEM level sender is retained in order to maintain factory functionality. Part number 20-1074 is specific to the 22+ Toyota GR86 and Subaru BRZ fuel tanks.

 

Product Features:

PREVENTING FUEL STARVATION

The kit includes a 1-piece anodized aluminum collector box that makes installation a breeze and keeps fuel trapped around the pump inlet(s). There is a 355 LPH 1-way fill valve incorporated in the bottom of the collector that allows fuel in, but not out. Furthermore, the collector box is constantly replenished with fuel returning from the pressure regulator.

NOTES ABOUT THE VENTURI JET PUMP

  1. The OEM venturi jet pump in the return line creates a restriction that can impact fuel pressure reliablity. 
  2. Radium Engineering has redesigned the siphon system to eliminate this restriction but still effectively scavenge fuel. This means higher flowing pumps can safely be used without fuel pressure issues.
  3. Depending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps.
  4. If it is important for fuel pressure to hold steady after the engine is shut down, install one of these CHECK VALVES somewhere in the fuel system.

NOTES ABOUT FUEL PRESSURE

  • This system eliminates the OEM fuel pressure regulator inside the stock unit.
  • This system requires the use of an aftermarket fuel pressure regulator. 
  • A fuel pressure regulator is included in the add-on plumbing kit listed above.

NOTES ABOUT FILTRATION

  • This system eliminates the OEM "post" fuel pump filter. A low-micron aftermarket fuel filter should be installed downstream to protect the injectors from debris.
  • A post-pump fuel filter is included in the add-on plumbing kit listed above.

NOTES ABOUT WIRING

  • Single fuel pump installations can re-use the OEM fuel pump controller wiring.
  • Radium recommends upgrading the wiring to ensure the pumps are operating at their full potential.
  • Universal fuel pump wiring kits can be found separately in the add-ons above. Select one for each aftermarket fuel pump used.

FUEL PUMP COMPATIBILITY

  • *Ti Automotive Walbro F90000267
  • *Ti Automotive Walbro F90000274
  • *Ti Automotive Walbro F90000285
  • **Deatschwerks DW440 (brushless)
  • **Fuelab 49614 (brushless)
  • **Protec 11928 (brushless)

There will be enough components included to use 1 or 2 fuel pumps. Depending on the setup, some parts will simply not be used. 

*Sock filters are provided in these kits for these fuel pumps.

**Sock filters are included from the fuel pump manufacturer.

 

Included Components:

  • 8AN ORB to 8AN Male Pump-Out Fitting
  • 6AN ORB to 6AN Male Return Fitting
  • Collector Box with 1-Way Fill Valve
  • Venturi Jet Pump Siphon
  • High Current Electrical Connections
  • Anodized Fuel Level Sender Mount
  • Twin Fuel Pump Compatibility 
  • Brushless Pump Compatibility
  • Single Merged Fuel Pump Outlet
  • Stainless Hardware and Clamps
  • Alternative Fuel Compatibility

 

Vehicle Fitment:

  • 2022+ Subaru BRZ ZD8
  • 2022+ Toyota GR86 ZN8

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Shipping Policy
  • We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
  • Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
  • We take extra care in packaging your orders to ensure you quality parts arrive safely
  • PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
  • All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
  • Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
  • PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only
Warranty/Refund Policy

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

  • Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
  • Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
  • If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
  • Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
  • We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
  • You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
  • Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
  • There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
  • Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

  • Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
  • Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
  • Warranty does NOT cover costs of shipping to and from in any circumstance.
  • All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
  • Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
  • Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
  • Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
  • Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
  • All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.