Skip to content
CONTACT SALES: +61 2 5500 7523
CONTACT SALES: +61 2 5500 7523

Country

Radium Crankcase Fluid Lock Catch Can Kit - Ford Focus ST LW/LZ 11-18

SKU 20-0357-FL
Original price 10,296.43 ฿ - Original price 10,296.43 ฿
Original price
10,296.43 ฿
10,296.43 ฿ - 10,296.43 ฿
Current price 10,296.43 ฿

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from high performance driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance.

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and Crankcase side) function completely independent of each other and are sold individually or together.

They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.

 

Crankcase Vent Side Catch Can Kit:

This catch can kit mounts on the back LH side of the engine bay. The Focus RS requires kit 20-0316, while the Focus ST requires kit 20-0357. This is due to different mounting bracket designs necessary because of the subtle changes between the engine bays.

For clearance purposes, Focus ST installations REQUIRES Radium 20-0356 Sound Symposer Delete Kit or other symposer delete kit to be installed.

This catch can runs inline with the crankcase breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.

 

Each kit includes the following:

  • Anodized oil catch can with integrated condenser and dipstick
  • Anodized laser cut Focus specific mounting bracket
  • Anodized aluminum -AN adapter fittings and hose ends
  • Enough PCV hose for custom applications  
  • Stainless steel mounting hardware

 

Vehicle Fitment:

  • 2011-2014 Ford Focus ST MK3 LW (Symposer Delete Required)
  • 2015-2018 Ford Focus ST MK3 LZ (Symposer Delete Required)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Shipping Policy
  • We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
  • Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
  • We take extra care in packaging your orders to ensure you quality parts arrive safely
  • PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
  • All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
  • Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
  • PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only
Warranty/Refund Policy

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

  • Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
  • Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
  • If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
  • Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
  • We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
  • You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
  • Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
  • There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
  • Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

  • Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
  • Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
  • Warranty does NOT cover costs of shipping to and from in any circumstance.
  • All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
  • Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
  • Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
  • Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
  • Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
  • All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.